| Hydraulic
Hose Products |
|
|
Hose is sold by the Reel and as
Custom Hose Assemblies!!!
|
|
Click on Hose Picture for Sizes and
Specifications.
|
|
Click on the Coupling Picture to
View Hose Ends for that hose.
|
|
Call
800-466-4673 or
Email for Pricing and Availability
on Full Reels and Custom Assemblies |
|
|
AXT 100R17 |
AXT 100R17
Meets or exceeds the requirements of SAE 100R17
Tube: Nitrile
Reinforcement: 1/4" thru 3/8" One wire braid, 1/2" thru 1” Two wire braids
Cover: Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved
Temperature: -40°C to +100°C (-40°F to +212°F), intermittent use up to +125°C (+257°F)
Packaging: Reels
Application: Petroleum based hydraulic fluids, gasoline, water, diesel fuels and lubricating oils,
biodegradable hydraulic oil, fire resistant synthetic polyol esters, USCG 1942-1 accepted. |
Hose
Ends Available for
AXT 100R17 Hose |
|
EX 2SN Two Wire
Braid Hose |
EX 2SN Two Wire Braid Hose
Meets or exceeds the requirements of SAE 100R2AT-EN853
DIN 20022 2SN-ISO 1436 Type 2
Tube: Nitrile
Reinforcement: Two braids of high tensile steel wire
Cover: Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved
Temperature: -40°C to +100°C (-40°F to +212°F), intermittent use up to +125°C (+257°F)
Packaging: Z\v" - 1” Reels, 1Z\v” - 2” Coils
Application: Petroleum based hydraulic fluids, gasoline, water, diesel fuels and lubricating oils,
biodegradable hydraulic oil, fire resistant synthetic polyol esters, USCG 1942-1 accepted. |
Hose
Ends Available for
EX 100R2AT Hose |
|
NX Four Spiral Hose |
NX Four Spiral Hose
Exceeds the requirements of SAE 100R12 - EN856
Tube: Nitrile
Reinforcement: Four spirals of high tensile wire
Cover: Black, oil, abrasion and weather resistant synthetic rubber, MSHA approved
Temperature: 40°C to +121°C (-40°F to +250°F)
Packaging: Coils
Application: Hydraulic systems with petroleum or water/glycol based fluids and for fuel and lubricating oils. |
Hose
Ends Available for
NX 100R12 Hose |
|
607 100R7
Thermoplastic |
607 100R7 Thermoplastic
Meets or exceeds the requirements of SAE 100R7 / JIS K6375 / ISO 3949
Tube: Nylon
Reinforcement: Synthetic Fiber
Cover: Black perforated high abrasion resistant polyurethane
Temperature: -40°C to +100°C (-40°F to +212°F)
Packaging: Coils
Application: Hydraulic and pneumatic systems. Excellent chemical range, over-the-sheave,
robotics, fire resistant fluid and hot water. |
Hose
Ends Available for
607 100R7 Thermoplastic Hose |
|
607N 100R7
Non-Conductive Thermoplastic |
607N 100R7 Non-Conductive Thermoplastic
Meets or exceeds the requirements of SAE 100R7 / JIS K6375 / ANSI A92.2
Tube: Nylon
Reinforcement: Synthetic Fiber
Cover: Orange, NON-perforated abrasion resistant polyurethane
Temperature: -40°C to +100°C (-40°F to +212°F)
Packaging: Coils
Application: Designed specifically for non-conductive electrical environments where contact with high voltage may be
present.
Notes: Twin or multi-line constructions available. Meets SAE J517 for less than 50 micro-amps leakage under
75,000 volts per foot. Meets or exceeds SAE 100R7 specifications. Complies with ANSI A92.2 for Vehicle-Mounted Aerial Device standards. |
Hose
Ends Available for
607N 100R7 Non-Conductive Hose |
|
PROJET® 4000 - 4000
PSI Pressure Wash |
PROJET® 4000 4000 PSI Pressure Wash
Tube: Seamless, black synthetic rubber
Reinforcement: One braid of high tensile steel wire
Cover: Wrapped abrasion & weather resistant synthetic rubber,
Black, Blue or Gray
Temperature: -29°C to +121°C (-20°F to +250°F)
Packaging: 50’ 100’ 150’ 200’ Bulk Reels
Application: Pressure wash equipment and agricultural wash down spraying |
Hose
Ends Available for
Projet® 4000 Pressure Wash Hose |
|
| Click
link below for Technical Data on Hose and Fittings |
|
|
Call
800-466-4673 or
Email for Pricing and Availability
on Full Reels and Custom Assemblies |
|
